1. General Description.
Fan Coil Units High Static
Durate Fan Coil Units are the solution for cooling/heating applications. They are available in a wide range of models and sizes with nominal capacities ranging from 6.0 kW to 20.2 kW
in cooling and 13.1 kW up to 40.8 kW in heating.
This extensive Fan Coil series is ideal in combination with Durate water chillers or heatpumps for airconditioning residences, offices, shops or any other commercial application were comfort conditions are required, blending in perfectly with the aisthetics of any space.
■ Asynchronous motors + 6-speed Autotransformer (3-speed connected in the factory)
■ Last generation fan made of plastic with low revolutions number, statically and dynamically balanced, superlative silent
■ Highly efficient coil
■ Left or Right hydraulic connections
■ Wide variety of models, versions, accessories, variants, solutions
2. Technical Description
2.1 Main Casing
Main casing (Bearing structure) made of extremely thick steel-sheet, resistant to rust, corrosion, chemical agents, solvents, aliphatics and alcohols.
Self-supporting and removable panels provided with holes (buttonholes) for ceiling/wall mounting directly through the main casing.
Pre-cuts slots and prearranged holes to configure the unit on request, to install the accessories, to output for the water connections on the left or right, to reverse the unit even on-site.
Assembled with self-threading screws for fast, total and easy check/maintenance. Reduced sizes, optimised volumes.
Available in a very large range of horizontal and vertical versions.
Available main casings:
Z : Single skin panel made of galvanized steel + internal thermal-acoustic insulation (class M1) of all parts
in contact with the coil.
P : Single skin panel made of pre-painted steel white RAL9002 colour + internal thermo-acoustic insulation (class M1) of the parts in contact with the coil.
2.2 DRAIN PAN (WITH THERMAL INSULATION)
Double inclination drain pan for optimised condensate drainage, provided with drainpipe (standard on the same side of coil connections) + external heat insulation (class M1).
2.3 HEAT EXCHANGER (WATER COIL)
Highly efficient coil (Turbolenced Fins with a high number of Reynolds) made of copper pipes and aluminium fins fixed by mechanical expansion. Coil connections provided with anti-torsion system, manual air vent valves, manual water drain valves.
Standard connections on the right side; on request connections on the right side, anyway can be easily reversed even on working site.
1 coil for a 2-pipe system; 2 coils for a 4-pipe system. Coils tested at 30 Bar pressure, suitable to work with water at max 15 Bar pressure.
Coils designed to work with hot water (boiler), low temperature hot water (condense boiler, solar energy system, hot water pump, etc.), high temperature water (industrial processes and/or high temperature boiler), chilled water (chillers and/or industrial processes), water added with glycol.
